What size cone wrench do I need?
Cone wrenches In order to get into those hard-to-reach slots on hub axle cones you are going to need a good set of cone wrenches. Front hubs usually require a 13mm on the axle cone and a 15mm for the locknut. Rear hubs usually require a 15mm on the axle cone and a 17mm for the locknut.
Can you use a cone wrench for pedals?
Because cone wrenches come in generally useful sizes, and are very light, it is often tempting to use them for other purposes, such as saddle adjustments and tightening axle nuts or even pedals. Resist this temptation!
What size cone wrench Do I need Shimano hub?
13mm is the standard for cones on Shimano and Formula front hubs. 15mm is the standard for cones on Shimano and Formula rear hubs. 17mm is the standard lock nuts on front and rear Shimano and Formula hubs, only the high end (XT/XTR) need a 17mm cone wrench, most can actually use a 17mm combo wrench.
What size wrench do I need for a bike?
It’s made up of 4-, 5- and 6mm hex wrenches (the sizes needed for most bike repairs), and the convenient shape provides ample leverage on most bicycle fasteners.
What size wrenches do I need for bike?
HEX TOOLS Once you own a Y hex wrench, you’ll never want to be without one. It’s made up of 4-, 5- and 6mm hex wrenches (the sizes needed for most bike repairs), and the convenient shape provides ample leverage on most bicycle fasteners.
What is a tappet wrench?
Definition of tappet wrench : a wrench with an open-end jaw at each end of a long thin handle.
What size is a bicycle axle nut?
The size of the thread on the axle is the same as an 8 mm screw, but a standard M8 nut (with 13 mm hex) does not fit on it. Do bikes have some special kind of nut there?…8 Answers.
| Nominal Thread Size | Example of Bicycle Uses |
|---|---|
| 8mm x 1mm | Square-type crank bolts, front solid axle hubs, suspension system hardware |
What size are bike sockets?
Pedal wrench flats are typically 15mm in size. 9/16″ (~14.3mm) is somewhat common on older pedals. 17mm and other sizes have been used, but you aren’t very likely to encounter them. (A “cone wrench” is thinner and shorter than a pedal wrench, and unable to provide appropriate durability or leverage for use on pedals.