What is the difference between TE20 and tea 20?
The main difference from its predecessor was the Standard Motor Company petrol engine it was fitted with, whereas the TE20 had a Continental engine. Originally, the TEA20 was equipped with an 80-mm bore, 1.9-litre Standard engine.
How does the Ferguson system work?
The ‘Ferguson System’ – elements of which were patented throughout the 1920s – was in the end a triangular set of three attachment points by which the trailed implement would lock fully into the back of the tractor; and in such a way that concentrated pressure, and thus tractive power, low down and towards the front of …
What does tea stand for on a Ferguson tractor?
Some were converted in the UK to use a 3-cylinder Perkins diesel engine. TE stood for Tractor England. TO stood for Tractor Overseas. Between 1948 and 1951, the TO20 with a Continental engine was built in Detroit, Michigan.
What is draft control on a tractor?
Draft control senses the extra strain on the hitch and allows the plow to raise just enough to get through the hard spot, immediately returning to the desired depth. The location of the draft control lever or knob is different in every tractor, but the process of determining the correct setting is the same.
What is the difference between draft control and position control?
Position control :This will control the working depth of 3-point hitch mounted implement regardless of the amount of pull required. Draft control: This will control the pull of the 3-point implement.
How old is a Ferguson tractor?
The model name came from Tractor, England 20 horsepower (not the true power delivered but from a formula based on engine size). TE range of Ferguson tractors was introduced in England in 1946, following 30 years of continuous development of “The Ferguson System” from 1916.
What is a Ferguson TE20 tractor?
The Ferguson TE20 is an agricultural tractor designed by Harry Ferguson. By far his most successful design, it was manufactured from 1946 until 1956, and was commonly known as the Little Grey Fergie.
Why did the Ferguson TE20 have a three point linkage?
At the time of its introduction the Ferguson three-point linkage was unique to the TE20, and to gain the full utility of the tractor the farmer also had to purchase specially-designed implements to work with the tractor.
Why is the Ferguson tractor so popular?
Ferguson became well known for its effective and distinctive advertising, intended to demonstrate the abilities of the TE-20 tractor to farmers who previously had used only draft horses and had little experience with mechanised equipment.
What happened to standard Ferguson tractors?
Standard developed a new wet-liner engine for the tractor, and for Standard’s road cars, such as the Vanguard . Production started in the late summer of 1946, nearly a year before the last Ford Ferguson came off the line in Detroit in June 1947. The break with Ford left Harry Ferguson and his US company with implements to sell but no tractors.