What is MP ammo?
From Wikipedia, the free encyclopedia. The Raufoss Mk 211 is a . 50 BMG (12.7×99mm NATO) multi-purpose anti-materiel high-explosive incendiary/armor-piercing ammunition projectile produced by Nammo under the model name NM140 MP. It is commonly referred to as multipurpose or Raufoss, meaning red waterfall in Norwegian.
What is a HEAT projectile?
High Explosive Anti-Tank (HEAT) is a type of warhead found in a variety of projectiles, including Shells, Rockets, Missiles, and GPs. It uses a special explosive mechanism to penetrate armor without requiring high impact velocity, making it a good weapon against armored vehicles.
How much does a 120mm HEAT round weigh?
120mm M865 Technical Specifications
Cartridge Data | |
---|---|
Length | 881 mm (34.7”) |
Weight | 17.2 kg (38 lb.) |
Propellant type | M14 Granular |
Propellant weight | 7.3 kg (16.1 lb.) |
What are Mpat rounds?
The MPAT round has a two-position fuze, ground and air, that must be manually set. The M1028 Canister round is the third tank round being replaced. The Canister round was first introduced in 2005 by the Army to engage and defeat dismounted Infantry, specifically to defeat close-in human-wave assaults.
What are green tip 50 BMG?
The . 50 caliber MK211 has a green bullet tip with an aluminum color annulus. This armor-piercing bullet is designed to perforate or penetrate hardened or bullet-resistant targets. The cartridge is used against armored personnel vehicles.
How much concrete can a 50 cal penetrate?
Thus, the Army says that at the long range of 1,500 meters (1,640 yards), ball ammunition can penetrate one inch of concrete, six inches of sand, and 21 inches of clay. At the lesser range of 35 meters (38 yards), ball ammunition can penetrate an inch of armor plate and 16 inches of log wall.
What does heat MP t mean?
The 120mm M830 High Explosive Anti-Tank-Multi Purpose – Tracer (HEAT-MP-T) is a chemical energy, multi-purpose projectile with an anti-personnel capability.
What are HEAT shells?
In tank: Ammunition. …during the 1950s was the high-explosive antitank (HEAT) shell. This shell used a shaped charge with a conical cavity that concentrated its explosive energy into a very high-velocity jet capable of piercing thick armour.
How heavy is a 120mm shell?
Thus, a round of 120 mm Rheinmetall APFSDS ammunition has a mass of 19.8 kg, which is little more than the 18 kg mass of a typical 105 mm APFSDS round with the traditional metallic cartridge case.
How much does an Mpat weigh?
M1 Abrams | |
---|---|
Variants | See variants |
Specifications | |
Mass | M1: 60 short tons (54 t) M1A1: 63 short tons (57 t) M1A1 SA: 67.6 short tons (61.3 t) M1A2 SEP v2: 71.2 short tons (64.6 t) M1A2 SEP v3: 73.6 short tons (66.8 t) |
Length | Gun forward: 32.04 ft (9.77 m) Hull length: 26.02 ft (7.93 m) |
What is the M830A1 HEAT round?
The M830A1 HEAT (High Explosive Anti-Tank) round, recently fielded for the M1A1 and M1A2 Main Battle Tank, is a major advancement over its predecessor, the M830, which has been in the US inventory since the early ’80s. HEAT rounds have multi-purpose warheads which are used to defeat armored vehicles, helicopters and soft targets such as bunkers.
What is a HEAT MP-T round?
The cartridge; 120mm, HEAT-MP-T, M830A1 is a high explosive antitank, multipurpose, tactical service round with tracer. The M830A1 is used in the 120-mm, M256 smooth bore tank cannon and is a fin-stabilized round with a discarding sabot.
What is the difference between DM12A1 and M830 HEAT-MP-T?
The M830 HEAT-MP-T, 120-mm cartridge is a direct translation of the German DM12A1 round with the exception that a United States design fuze system and explosive (Composition A3, Type 11) is used.
What is the M830A1 used for?
The M830A1 adds higher velocity launch, increased armor penetration capability and selectable fuzing which allows for the engagement of a variety of targets. The M830A1 is unique in that it features a three-piece discarding aluminum sabot, a feature normally associated with kinetic energy projectiles.