What is iso 9013?
ISO 9013:2017 presents geometrical product specifications and quality tolerances for the classification of thermal cuts in materials suitable for oxyfuel flame cutting, plasma cutting and laser cutting.
Is standard for laser cutting?
International Standard ISO 9013 applies to materials suitable for oxyfuel flame cutting, plasma cutting and laser cutting. It is applicable to flame cuts from 3 mm to 300 mm, plasma cuts from 1 mm to 150 mm and to laser cuts from 0,5 mm to 40 mm.
What is the tolerance of a laser cutter?
Profile Cutting Tolerances
| Cutting Process | Tolerance |
|---|---|
| Laser | ± 0.005″ | 0.13mm |
| Extruded Chopsaw Extrusions 48″ (1219.2mm) or Shorter | +0.010″, -0.000″ | +0.25mm, -0.00mm |
| Extruded Chopsaw Extrusions Longer than 48″ (1219.2mm) | ± 0.125″ | 3.175mm |
| Chopsaw | ± 0.035″ | 0.889mm |
Which gas is used in laser cutting?
Oxygen is the standard active assist gas used for laser cutting of mild and carbon steels. It is also referred to as the cutting gas. When cutting with oxygen, the material is burned and vapourised after being heated up to ignition temperature by the laser beam.
What is cut tolerance?
Cutting tolerance is the slight variation that occurs when online printing projects are cut down to size. Smartpress recommends a tolerance of 0.125″ for our online printing services, meaning the trim line can vary by up to 0.125″.
Are acrylic fumes toxic?
Acrylic fumes can cause headaches, dizziness, nausea and irritation. The filing of artificial nails can cause asthma. Nail services create dust that can cause wheezing and chest tightness. Formaldehyde can be found in nail strengtheners.
How accurate is laser cut steel?
The short answer is very accurate. Today, cut width can be extremely small with laser cutting (less than 0.0001 inch) whilst dimensional accuracy is almost as precise (at approximately ± 0.0005 inch).
What two parameters do you need to set on a laser cutter before you start cutting or engraving?
Generally start with a high speed and low power when laser engraving or cutting new materials. This ensures a low laser impact on the material.
Is oxygen required for laser cutting?
Ensuring the oxygen purities you need for optimum laser cutting operations. Laser cutting depends on an assist gas, which may be active or inert. Oxygen is the standard active assist gas used for laser cutting of mild and carbon steels. It is also referred to as the cutting gas.
What does ISO 9013 stand for?
ISO 9013:2017 (en), Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
What is the difference between EN 1090 and EN ISO 9013?
EN ISO 9013 defines the geometrical specification and quality tolerances for thermal cutting which EN 1090 refers to. Table 4 shows the quality of cut surfaces defined in accordance with EN ISO 9013 for each of the execution classes.
What is EN ISO TR 17663?
ISO/TR 17663 gives guidance for quality requirements governing heat treatment. Inspection before and during welding Welding inspection, testing and correction An inspection and testing plan needs to be developed and documented according to EN ISO 3834. The testing and any associated corrections also need to be documented.
What is a constituent product EN 1090?
10 EN 1090 Guideline A constituent product is a material or product used to manufacture a component which remains part of the finished product, e.g. raw materials and welding consumables. These products must meet the relevant European standards or other standards as specified.