What is a leading link?

What is a leading link?

A leading link fork suspends the wheel on a link (or links) with a pivot point aft of the wheel axle. Russian Ural motorcycles used leading link forks on sidecar equipped motorcycles, and aftermarket leading link forks are often installed today on motorcycles when they are outfitted with sidecars.

Why does sidecar have a leading link?

If you’re serious about sidecar outfits, the only way forward at the front is leading link forks. For more accurate steering with less effort and more predictable suspension behaviour under braking, the leading link fork outperforms telescopic forks every time for sidecar or trike use.

What is the front end of a motorcycle called?

A motorcycle fork is the portion of a motorcycle that holds the front wheel and allows one to steer. For handling, the front fork is the most critical part of a motorcycle.

What are triple trees?

The triple tree is the triangle like structure that connects the entire front end of a bike to the frame. Also known as a triple clamp or yoke, these set ups can be changes out for a different rake, or just to change the aesthetic of the bike.

Who invented telescopic forks?

Alfred Angas Scott
THE TELESCOPIC FORK. Ninety nine years ago, Alfred Angas Scott released the 1908 Scott. It had water cooling, a lightweight duplex frame, and a low centre of gravity. It also had telescopic forks.

How does an Earles fork work?

During the 1960s and early ’70s, many motorcycles came with leading-link forks, often called Earles forks. Unlike the typical telescopic fork, leading links had the uncanny ability to climb over bumps and obstacles by folding their shock-absorber-suspended front link up and back with the force of the bump.

What is the motorcycle body called?

Chassis
Chassis. The chassis of a motorcycle includes the frame and suspension, along with the front forks, of the vehicle.

What is a top triple tree?

What are Triple Tree forks?

Triple Tree (“triple clamp” (US) or “yoke” (UK)) attaches the fork tubes to the frame via steering head bearings, which allow the forks to pivot from side to side, and therefore steer the motorcycle.

Can I build Sarge’s leading link front end?

They have been made available for use of members seeking knowledge on the Leading Link Front End. The original pictures and drawings of “Sarge’s Leading Link Front End” were part of the Kansas BTW site which has since been removed from their site. As in the above disclaimer we/I do not recommend you build this front end.

What is the best front end design for a sidecar?

The very best front end design for sidecars and trikes is the leading link design and it has been around forever and have been done in many different styles. Iv seen a lot of homemade forks recently, mostly built with square tubeing, as the machineing is easier for most home builders..

Is it dangerous to build a trike?

Building a trike is hazardous. Any kind modifications to the original vehicle can be hazardous. Before starting your build, realize that you and you alone are responsible for anything that could happen to yourself and others that you come into contact with.