How to configure d-link DAP 1150?

How to configure d-link DAP 1150?

You can click launch wireless setup wizard to quickly configure your access point. If DAP-1150 successfully connect to the AP or Wireless router with repeater mode, you can also click add wireless device with WPS to setup your wireless network using WPS. Click Launch Wireless Setup Wizard to begin.

How do I setup a Dlink wireless access point?

How to change a D-Link router to AP mode

  1. Connect a computer to the D-link router and launch a web browser.
  2. Visit the following router configuration page:
  3. You are prompted to enter a username and password.
  4. Click Setup > Local Network.
  5. Set the DHCP Mode to Off.
  6. Click Apply Changes.

What is Dlink access point?

D-Link offers a wide range of robust wireless Access Points (APs) operating in both the 2.4GHz and 5GHz frequency bands, supporting IEEE 802.11ac – the latest wireless standard ratified in January 2014. For cost-conscious networks, D-Link also offers APs supporting the tried-and-true 802.11n standard.

Is D-Link DAP-1360 a router?

The DAP-1360 offers seven modes of operation, namely Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router, and WISP Repeater (Range Extender) Mode. These modes allow you to flexibly configure the device for use with different wireless applications.

How do I find the IP address of my D-Link access point?

How to find the IP address of an Access Point?

  1. Start > Run > type: cmd (to enter command prompt)
  2. Type: ipconfig /all.
  3. In the list, find the line that is your “Default Gateway”, this is your primary router/access point.

How do I set up my D-Link dap-1150 wireless network?

Create a wireless network for your home and office using the D-Link DAP-1150 which is an 802.11g standard Wireless Access Point. Connect this Access Point to a Broadband modem/router and wirelessly share your Internet connection.

What is access point mode on DAP 1150?

Access Point Mode In Access Point mode, the DAP-1150 acts as a central connection point for any computer (client) that has a 802.11n or backward-compatible 802.11b/g wireless network adapter and is within range of the AP. The APs and wireless router (if used) must be within range of each other.

How does the dap-1150 work as a router?

Router Mode In the Router mode, the DAP-1150 connects to a broadband modem. In this mode, the DAP-1150 also acts as a router for wireless clients on your network and provides NAT (Network Address Translation) and a DHCP server to generate IP addresses.

What are the available accessories for the dap-1150?

Abra a embalagem do DAP-1150 e verifique se todos os seguintes itens estão incluídos: • Access Point Wireless G DAP-1150 • Antena destacável • Adaptador de Alimentação • Cabo Ethernet Cat.