How much power does a f23a have?
Performance. Whether installed in the Acura 2.3 CL or the Honda Accord, the F23 cranked out 150 horsepower at 5,700 revolutions-per-minute (rpm) and 152 ft. -lbs. of torque at 4,900 rpm.
Is the Honda 2.4 VTEC a good engine?
The Honda 2.4L engine is a decent one, and this has been the consensus of almost everyone who has driven it over some time. The engine, named K24, is still manufactured in 2021, despite its release exactly two decades prior.
How much HP does a Honda K24 have?
The compression is 6:1:1, and the rpm is 6,500 and the power has been estimated at 166 horsepower with 161lb/ft torque.
What is the difference between F23A1 and F23A4?
F23A4. This engine was used in the 1998-2002 Honda Accord ULEV models. It is substantially similar to the F23A1, but features ULEV certification with a slight reduction of power: 148 hp (110 kW) with a maximum torque of 204 N⋅m (150 lb⋅ft).
How much horsepower does a h22 Honda Motor have?
182 hp
H Series Motor Specifications Chart 1
| Engine | Type | Power |
|---|---|---|
| H22A | Closed Deck | 220 PS (162 kW; 217 hp) @ 7,200 rpm & 163 lb⋅ft (221 N⋅m) @ 6,500 rpm |
| H22A1 | 190 PS (140 kW; 187 hp) @ 6,800 rpm & 158 lb⋅ft (214 N⋅m) @ 5,500 rpm | |
| H22A2 | Closed Deck | 185 PS (136 kW; 182 hp) |
| H22A3 | 182 hp (185 PS; 136 kW) |
What Honda Motor is a 2.3 L?
| Honda F engine | |
|---|---|
| Overview | |
| Configuration | Naturally aspirated Inline-4 |
| Displacement | 1.8–2.3 L (1,849–2,254 cc) |
| Cylinder bore | 85 mm (3.35 in) 86 mm (3.39 in) 87 mm (3.43 in) |
How long will a Honda 2.4 engine last?
It is safe to say that Honda engines can last up to 30 years and have a good reliability rating. Our timing belt must be scheduled according to our schedule and every oil change, gasket, tuneup, and gasket change will occur on time.
How long will a K24 engine last?
Well, a K24A engine should last about 200,000 miles or 300,000 kilometers. While it’s true that all cars should be durable as long as we take care of them, we can’t deny that some are more durable than others. The Honda 2.4 series is part of that category of durable engines, like many other parts manufactured by Honda.
What is the power of the f23a4 engine?
Its power was 152 HP @ 5,700 rpm, the torque was 205 Nm @ 4,900 rpm. Such an engine was installed in Honda Accord and Acura CL. 2. F23A4 was an analogue to F23A1, but oriented to higher environmental standards. This motor had modified intake and exhaust manifolds, and a different ECU.
What is the Honda F23A1 engine type?
The Honda F23A engine was installed until 2003, then it was replaced with a more modern 2.4-liter K24A. 1. F23A1 was a typical engine with a VTEC system and the compression ratio of 9.3.
Can you buy a Honda Accord with an f23a4 engine?
You can buy a Honda Accord with an F23A4. 3. F23A5 – in this version, non-VTEC SOHC head was used, with compression ratio reduced to 8.8. It affected power, it dropped to 135 HP @ 5,500 rpm and the torque of 206 Nm @ 4,500 rpm.
What are the parts of a Honda F23?
Honda’s F23 consisted of an iron-aluminum alloy block and aluminum alloy heads. Honda built the F23 as an inline four-cylinder, which aligns all of the cylinders in a single row in the engine block.