How do you reference a dimension in SOLIDWORKS?

How do you reference a dimension in SOLIDWORKS?

To add a reference dimension:

  1. Click Smart Dimension. (Dimensions/Relations toolbar) or click Tools > Dimensions > Smart.
  2. In a drawing view, click the items you want to dimension. You can dimension to a silhouette edge.
  3. Use rapid dimensioning to place evenly spaced dimensions.

How do you show reference dimensions in drawing?

Reference dimensions are shown on a drawing as a value enclosed in parentheses. An alternate method is to follow the dimension with “Reference” or “Ref”. The use of “Ref” or enclosing the dimension inside parentheses are by far the most common notations used.

What is meant by reference dimension?

A reference dimension is a dimension on an engineering drawing provided for information only. Reference dimensions are provided for a variety of reasons and are often an accumulation of other dimensions that are defined elsewhere (e.g. on the drawing or other related documentation).

How do you indicate reference dimensions?

A Reference Dimension is a dimension given to any features that are just for reference – or visualization purposes. These are called out on a drawing using parenthesis (i.e., 5.125).

How do I see dimension names in Solidworks?

To show dimension names, click View > Dimension Names or, from the Heads-up View toolbar, click Hide/Show Items > View Dimension Names. Search ‘Dimension Names’ in the SOLIDWORKS Knowledge Base.

How do you move a dimension in Solid Edge?

To move a dimension within the view: Drag the dimension to the new position. To switch a dimension to a different feature of the same size within the view: Select the dimension and drag and drop the arrowhead handle to another edge.

How do you identify reference dimensions?

A Reference Dimension is a dimension given to any features that are just for reference – or visualization purposes. These are called out on a drawing using parenthesis (i.e., 5.125). It also could be a dimension that is described on another drawing or elsewhere. Either way, the dimension does not get inspected.

What is the symbol for reference dimension?

The parameter symbol for reference dimensions is rd# (or rsd# in the case of Sketcher).

Can you tolerance a reference dimension?

A (ref) dimension has no tolerance, so it would be impossible for it to be non-conforming.

What is the difference between a basic dimension and a reference dimension?

A basic dimension is a dimension of where a feature is theoretically located (or where it is intended to be located). It must have some other tolerance to it from GD. A reference dimension is just there to reference, but can be completely taken off the drawing to make sense.

How to track changes in dimension in Solid Edge draft?

When a drawing view is updated in the Solid Edge Draft environment, you can track dimensions and annotations that have been changed or deleted from the model. To open the Dimension Tracker dialog box so you can identify these changes, use the Tools tab→Assistants group→Track Dimension Changes command.

How to use not to scale in solid solid edge?

Solid Edge underlines the values of not-to-scale dimensions. The Not To Scale command is available on the context menu when a dimension is selected. Placing dimensions To add dimensions to elements, you can use a dimension command, such as Smart Dimension, and then select the elements you want to dimension.

What units are used in Solid Edge?

Select Units and Type of Operation The first tasks are to change the units to millimeters, and type of operation available. The standard units used with the default installation of Solid Edge are ISO (millimeters), but some installations may have used ANSI (inches) instead.

How to create a reference between dimensions in two different views?

Press Esc. Create a reference between dimensions in two different views. In the Home tab>Select group, select the Select command. Select the notch depth dimension, as shown below. On the Edit Definition command bar, in the Tolerance group, click the Dimension Type button. From the Dimension Type list, select Reference.(X).