How do I know what size flue pipe I have?

How do I know what size flue pipe I have?

In general, flue size should be 25 percent larger than the size of the stove pipe, which connects the stove to the chimney. This means a stove with a 6-inch diameter pipe would require at least an 8-inch flue; an 8-inch stove pipe requires a 10-inch flue, etc.

What is the standard chimney pipe size?

A. To get that answer, all you need to do is look at your wood stove and measure the inside diameter of the flue collar on the wood stove itself. If the stove has a 6” flue collar, then you should use 6” stove pipe and 6” chimney pipe through the roof.

What is flue diameter?

The building regulations say that the flue diameter (or cross sectional area) must not be smaller than the size of the stove outlet, which generally makes great sense. The recommended minimum diameters for stoves is as follows: up to 20kW burning smokeless fuel – Minimum 125mm diameter.

What is class A flue pipe?

Class A chimney pipe has many names, often referred to as double-wall chimney pipe, triple-wall chimney pipe, all-fuel pipe, or insulated chimney pipe. Class A pipe is used to vent high-temperature exhaust released from wood, coal, and oil-burning appliances such as fireplaces, stoves, boilers, and furnaces.

What’s the difference between stove pipe and chimney pipe?

What is the difference between stove pipe and chimney pipe? Many confuse the terms. Stove pipe is usually painted black and is used in the interior on the home until you transition through a wall or ceiling then class A chimney pipe is used thereon. Stove pipe, black pipe, single wall pipe all refer to the same thing.

What size is my chimney flue?

If the flue is circular, then it should be at least one-tenth the size of the fireplace opening. Flues should also mirror the size of a chimney. If a chimney’s diameter is six inches, then the flue should also measure six inches.

What diameter flue do I need?

The ideal flue size is typically determined by the exhaust outlet of the stove or appliance. The rule of thumb for sizing a chimney liner is that you never want it to be smaller than the appliance exhaust hole and you don’t want the liner to be three times the area of the exhaust hole of the appliance.

What is a Class 1 or 2 flue?

They’re not equipped to deal with solid fuel fires. However, which specific fires you’re allowed generally comes down to the size of the flue. Essentially, if your flue diameter is 7 inches, you’ll need a class 1 fire. For 5 inch flues, you’ll need a class 2 fire.

Is Class A chimney pipe double wall?

Class A chimney systems are double wall insulated chimney pipes that have a 2″ clearance rating from combustible material.

What is the difference between a flue and a vent?

Vents are similar to fireplaces and flues in that they may pass through other parts of the house and they do need temperature protection to prevent a transfer of heat from the vent to the surrounding building materials. However, vents are not designed to handle the high heat produced by wood burning fires.

What flue size do I need?

As a general rule, the diameter of the chimney should match the flue collar on your wood stove. A 6-inch stove requires a 6-inch flue. In most cases, a step up is also fine. For example, you could vent a 6-inch stove into an insulated chimney that is 8 inches in diameter.

What are the ftf-13 chimney clearance requirements?

Chimney Clearance Requirements: The FTF-13 chimney’s outer layer requires a minimum two inch (2”) air space to combustibles. The chimney system must be enclosed when installed in or passing through a living area where combustibles or people may come in contact with it. This is important to prevent possible personal injury or fire hazard.

What does ftf-13 stand for?

FTF-13 or Equivalent Chimney System (cont.) 68 FTF-13 Installation Components Round Termination FireStop Spacer Chimney Section Stabilizer Locking Band Anchor Plate Combination Offset Return Elbow FireStop Spacer (30°) Offset/Return Package (30°) 69 Summary 1. WARNING:

What size flue do I need for a 36 inch fire place?

Drafting formulas indicate that 14” diameter flue is large enough to support a two sided Standard Series 36” fire- place if the unit has at least 24’ of flue. This, however, is no guarantee of draft performance.

What is Standard Model 36 42&46?

STANDARD Models 36, 42 & 46 A PRODUCT OF EARTHCORE INDUSTRIES, LLC. THIS FIREPLACE IS DESIGNED for USE with SOLID WOOD LOGS, PLUMBED PROPANE (LP) or NATURAL GAS (NG), ONLY WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.