How do I connect my Canon MG3520 printer to a new Wi-Fi?

How do I connect my Canon MG3520 printer to a new Wi-Fi?

To connect your PIXMA MG3520 / MG3522 printer to Wi-Fi®, you can start cableless setup right from the printer panel.

  1. Make sure that the printer is turned ON.
  2. Press and hold down the printer’s Wi-Fi button (B) (as shown below) until the orange Alarm lamp (C) flashes twice, then release it.

Where is the IP address on a Canon MG3520 printer?

To view the IP address assigned to your PIXMA MG3520, please follow these steps:

  1. Make sure that your PIXMA MG3520 is turned on.
  2. Load a sheet of A4 or Letter-sized plain paper.
  3. Press and hold the Stop button until the Alarm lamp flashes 15 times.
  4. Release the Stop button.

How do I reset my Canon MG3520 to factory settings?

Press and hold the Stop button until the Alarm lamp flashes 17 times. Release the Stop button. The network settings are initialized.

How do I reset my Canon mg3520 wireless printer?

To reset the LAN settings, please follow these steps:

  1. Make sure that the machine is turned on.
  2. Press and hold the STOP button until the Alarm lamp flashes 17 times.
  3. Release the Stop button. The wireless setting of the printer has now been reset. Please note, the Wi-Fi lamp will remain lit.

Where is the WPS PIN on a Canon mg3520?

Hold down the Stop button (A) on the printer until the (orange) Alarm lamp (B) flashes 15 times, then release the Stop button after the fifteenth flash. The wireless connection setting information including the PIN code will be printed.

How do I connect my Canon 3500 printer to my laptop?

Hold down the Wi-Fi button (A) on the printer until the (orange) Alarm lamp (B) flashes once, then release the Wi-Fi button after the flash. Make sure that the (blue) Wi-Fi lamp (C) flashes quickly and the (green) POWER lamp is lit, then press and hold the button on the access point within 2 minutes.

How do I connect my Pixma mg3520/mg3522 to Wi-Fi®?

Find out how to initiate the cableless setup method to connect your PIXMA MG3520 / MG3522 to connect to a wireless network (LAN). Solution To connect your PIXMA MG3520 / MG3522 printer to Wi-Fi®, you can start cableless setup right from the printer panel. Make sure that the printer is turned ON.

Is canon mg3520 a good printer?

The Canon MG3520 printer perfectly fits your home or office due to its space-saving design and amazing printing facilities. This Canon MG3520 setup printer is capable of smooth printing and scanning. You can easily avail of the Canon MG3520 Wireless Setup here as this printer is Wi-Fi enabled.

How do I put my printer in cableless setup mode?

Press and hold down the printer’s Wi-Fi button (B) (as shown below) until the orange Alarm lamp (C) flashes twice, then release it. The printer processes for a few moments, then the blue Wi-Fi lamp flashes quickly and the POWER lamp remains lit. The printer is now in cableless setup mode.

How do I set up a cableless connection?

Click WIRELESS CONNECTION then NEXT. Click CABLELESS SETUP then click NEXT. Wait until a new window is displayed with the new setup guide. Continue to follow setup guide.