How do I connect a magic eye to my TV?
Plug your tvLink into the second TV’s aerial socket. Position your tvLink’s magic eye (the part that looks like a computer mouse) with a clear line of sight to your Sky remote. Switch your Sky box, and everything connected to it, on at the mains. You should see a red power light on your tvLink.
How do I reset my DSTV eye?
Let us go through the reset procedure and for a blueprint on how to unlock DStv remote.
- Hold down both the ARC and Standby for about 3 seconds.
- Continue holding the ARC button as you release the Standby.
- While you are still pressing the ARC button, dial 9499.
- Now, release the ARC button to complete the reset process.
How do I turn on RF2 on Sky HD box?
On your remote, key Services,0,0,1. Select to access the Installer Menu where you’ll find the RF2 settings. Key the whole sequence in one go. Don’t pause between key presses and don’t wait for the screen to change after each key press.
How does the DSTV eye link work?
TV Links are installed with DSTV SDPVR or HDPVR Decoders using your existing RF / Coaxial cable to control the PVR or decoder supporting TV Links from another room via the DSTV Remote. TV Links are powered from the decoder and does not require external power.
How do you get Sky on TV upstairs?
If you’re considering getting Sky in different rooms of your house, there are basically three ways you can do this:
- Connect your Sky box to a second TV with high-quality co-ax aerial cable, or.
- Connect your Sky box to a second TV with a wireless video sender, or.
- Get an extra Sky box for the second TV set.
Why does my TV link (magic eye) not work on tx-37g10b?
Why does my tv link (magic eye)not work on my TX-37G10B tele when it works on another tele. Expert: Aric replied 6 years ago. , In order Sky Magic Eye to work on the Panasonic, you need to connect to the TV’s “DVB” coaxial port, and THEN run a channel scan on the Panasonic, trying first “AIR”, and if that does not work, then trying “Cable”.
How do I connect my Panasonic TV to Sky Magic Eye?
, In order Sky Magic Eye to work on the Panasonic, you need to connect to the TV’s “DVB” coaxial port, and THEN run a channel scan on the Panasonic, trying first “AIR”, and if that does not work, then trying “Cable”. You will then go into the MENU, and under “Setup”, scroll to the DVB tuning MENU and run a Channel/Auto Scan.
Does the Skylink Magic Eye need to be connected to TV?
The SkyLink “magic eye” unit does NOT need to be connected to a secondary TV set in order to send your remote control signals back to your Sky Digibox. (For example, it can be used as a simple remote extender if your Digibox is in a cabinet.)
Why can’t I connect my magic eye to my TV?
However, the most common cause of problems is that the “magic eye” needs to be decoupled from the TV so I recommend in all cases you try this solution first. You can make or buy a decoupled cable (see SatCure site for details). Some Sky Digiboxes can not power more than two “magic eyes”.