What would cause an electric furnace not to kick on?

If your electric furnace is running hard but it isn’t producing enough heat to chase off the cold, this could be caused by a number of different issues. The most common issues include a faulty thermostat but these issues could also be a sign of a clogged filter, dirty air ducts, or a serious problem with your furnace.

Are furnace parts interchangeable?

Using different brands of units — often called a “mismatched system” — usually has no major short-term consequences as long as the coils, blower and wiring used are compatible and properly sized.

How long do electric furnaces usually last?

between 20 and 30 years
A furnace’s longevity depends on the type of furnace you own. A gas furnace on average lasts between 15 and 20 years. An electric furnace lasts between 20 and 30 years.

Is there a reset button on an electric furnace?

All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.

Does your AC have to match your furnace?

Although it’s possible to mix and match the systems, it’s not recommended, especially if the furnace is over 15 years old. Replacing the outdoor unit while leaving the old blower will result in lower efficiency and could result in premature failure and other problems.

Can you mix and match AC and furnace?

While it is recommended to buy the same brand for your HVAC systems, a furnace and an air conditioner manufactured by two different companies can usually still work together.

How often should an electric furnace be serviced?

once annually
Every home is different and two homes may have different types or styles of furnaces. Despite the differences in the different type of furnaces and HVAC systems, the general rule of thumb is to have your furnace serviced at least once annually.

How do I know if my heating element is bad?

Inspect the metal wire coil for any breaks in the wire. If the wire is solid and has no breaks in it, the heating element should be good. If the wire has a break in it, the heating element is defective.

Does an electric furnace have a reset button?

Whether you have a gas furnace, electric furnace, or oil furnace, every furnace owner needs to know how to reset when needed. The reset button pops out whenever any trouble occurs, like interrupted gas supply, empty oil tank, or overheated furnace. This reset button needs to be pushed in to restart the furnace.