What tool do you use to remove a tub drain?

What tool do you use to remove a tub drain?

A drain wrench is a drain removal tool that is form-fitted to drain basket crossbars. It greatly reduces the risk of accidentally breaking the crossbar. If you are using a drain wrench, insert the drain wrench into the drain and turn it counterclockwise to unscrew the drain basket.

How do I remove a bathtub drain flange?

If you’re removing the entire drain apparatus, including the basket (also known as the flange), insert your drain key or smart dumbbell into the opening. Turn it counterclockwise and continue turning until the drain flange is released, then remove the flange while it’s still attached to the drain key.

Are all tub drains threaded?

There are several different styles of tub drain — two of the most common are threaded and drop-in drains. Threaded drains are usually found in older tubs, while the drop-in version is common in newer models.

What thread is a bathtub drain?

One of the most confusing and annoying plumbing problems is replacing the bathtub drain (called a plug) that screws into the base (called a shoe). There are two common thread types (16 and 11 1/2 Threads Per Inch), and one uncommon one (14 TPI).

How do you remove the drain from a bathtub?

The faceplate will be on the tub wall near the faucet,not on the bottom of the tub with the drain.

  • These type of drains will stop a tub when a trip lever is activated.
  • Set the tip of the screwdriver underneath the lip of the loosened drain if you need some leverage as you pull it out.
  • Make sure to pull away from the tub wall.
  • How to clean and unclog a shower or tub drain?

    Mix 1/3 cup of baking soda with 1/3 cup of vinegar in a heat-resistant measuring cup.

  • As soon as it starts to fizz (which will be immediately),pour the solution down your clogged drain.
  • If you can,let it sit for at least one hour.
  • Then turn on the bathtub faucet and run hot water down the drain to help flush the mixture through the pipes.
  • How to remove a drain from a tub?

    fix the tub drain extractor by placing it on the drain. You’ve probably never heard of a tub drain but don’t worry because we’ll explain what it is.

  • tighten this tool. When you drop the tub drain extractor inside the tub drain,you’ll notice that it’s not tight enough.
  • fix a screw inside the extractor.
  • pull out the broken tub drain.
  • How to remove a broken or damaged tub drain?

    Tub Drain Extractor

  • Hammer
  • A screwdriver
  • Ratchet