How do I fix input not supported on my HP monitor?

How do I fix input not supported on my HP monitor?

Under the monitor name that is having the Input Not Supported error, click Display adapter properties for Display. In the popup pane, click the Monitor tab. In the Screen refresh rate, choose the recommended or default rate in the drop down menu. Save the changes and restart your computer.

Why does my HP monitor say no input signal?

Typically, a monitor displays a message “no signal error” when there’s a problem such as a loose cable, loose connections, or a problem with the input device. Graphics driver and output resolution problems can also cause this error.

Why does my monitor say no input detected?

The “No input signal” message can sometimes appear if the POST process is failing, and the computer cannot boot properly. If the POST process is failing and the computer is not starting up, the motherboard could be at fault.

How do I change the input source on my HP monitor?

To switch the input selection, use the Switch Video Input option in the OSD menu.

  1. Press the Menu button on the front of the monitor to access the OSD main menu.
  2. Navigate to Switch Video Input by pressing the + (plus) or – (minus) buttons on the monitor.
  3. Click Save and Return after you make your choice.

Why is input not supported?

The error “Input not supported” occurs when the computer’s resolution doesn’t match with the monitor. This error usually comes forward when you plug in a new monitor with your computer or you change the resolution to some value which is not supported.

How do I fix no input signal?

  1. Turn off your computer.
  2. Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm.
  3. Reattach the cable running from your monitor to your PC.
  4. Replace your monitor with another monitor if possible.
  5. Open your PC case and locate your video card.

How can I fix no VGA signal?

Sometimes this is enough to fix issues like VGA no signal.

  1. Completely turn off your computer and monitor and unplug their power cables.
  2. Wait for several minutes.
  3. Connect the VGA cable back to the monitor and your computer.
  4. Plug the power cable back.
  5. Turn on your computer and monitor.

How do I fix input signal not found?

How do I set input source on my monitor?

If the default source is not an active input, then the monitor will display the other input if it is active. You can change the default source by pressing Menu on the front panel button and selecting Source Control, and then selecting Default Source.

How do I set my monitor input to HDMI?

Right-click on the volume icon on the taskbar. Select Playback devices and in the newly open Playback tab, simply select Digital Output Device or HDMI. Select Set Default, click OK. Now, the HDMI sound output is set as default.

What kind of screen does the HP Pavilion w2408h have?

Loading… This information applies to the HP Pavilion w2408h monitor. The HP Pavilion w2408h is a 24-inch wide-screen flat panel monitor with liquid crystal display (LCD) and thin-film transistor (TFT) screen. Built-in USB hub with 3 USB 2.0 ports for connecting USB devices to the PC (requires a USB cable connection to the PC).

Why does my monitor say input not supported?

The message “Input Not Supported” usually means the resolution that is set in Windows does not match the resolution the monitor recognizes. That type of problem shows up more often when HDMI is being used and the output is not set for 1920 x 1080 resolution. It could also be a refresh rate set in Windows is not recognized by the monitor.

How to fix ‘input not supported’ error?

Fix 1: Troubleshoot the monitor connection. You may see the ‘Input Not Supported‘ error if there’s something wrong with the monitor connection. So you should check the monitor cable to make sure it works properly. Or you can switch to a new monitor cable. In addition, make sure the connection ports are working correctly.